CaKaDesign
Product Description
The hl-2270dw is a compact, monochrome laser printer with built-in wireless and ethernet network interfaces for small office or home office printer sharing. it features a fast print speed up to 27ppm, automatic duplex printing for two-sided documents, and up to 2400 x 600 dpi resolution for high-quality output. in addition, the printer’s stylish, space-saving design fits virtually anywhere.the hl-2270dw provides flexible paper handling via an adjustable, 250-sheet capacity tray and a manual by-pass slot for printing thicker media. it also offers a high-yield 2,600-page replacement toner cartridge to help lower operating costs and a toner save mode for less critical business documents.
Product Description From the Manufacturer
To help lower operating costs, an easy to install TN450 high-yield toner cartridge is available.
Automatic duplex printing for professional-looking two-sided documents.
The HL-2270DW is a monochrome laser printer that offers an automatic duplex capability for printing two-sided documents with ease, fast printing at up to 27 pages per minute, and built-in wired and wireless networking for sharing with others. It features a stylish, space-saving design that complements virtually any environment. In addition, it offers convenient paper handling via an adjustable, 250-sheet capacity tray. To help lower your operating costs, a high-yield replacement toner cartridge is available.
|
Provides built-in wireless 802.11b/g and Ethernet interfaces to share with others on your network. Eliminate extra cables and conveniently place your printer with wireless networking or connect locally to a single user via its USB interface.
Easily Print Two-Sided Documents
Produce professional-looking two-sided documents, brochures and booklets using the automatic duplex printing feature. This feature can help reduce your paper use and save money.
Fast Laser Printing
Helps improve your productivity with a print speed of up to 27ppm.
Convenient Paper Handling
The HL-2270DW can meet all of your printing needs via an adjustable, 250-sheet capacity paper tray for letter or legal size paper and a manual feed slot for printing envelopes and letterhead.
Stylish, Compact Design
The HL-2270DW’s small footprint will conserve valuable workspace.
Easy To Set-Up and Use
Users with wireless access points that support Wi-Fi Protected Setup™ or AOSS™ can automatically configure their wireless settings by simply pressing a button on their router.
High-Quality Output
With a print resolution up to 2400 x 600 dpi, the HL-2270DW produces professional-looking output with crisp text and excellent graphics.
Toner Save Mode
Use less toner and save money by using Toner Save mode for your less critical business documents
Straight-Through Paper Path
A manual feed slot and rear paper exit provide a straight-through paper path to ensure that all of your printed materials always look their best.
What's In The Box
HL-2270DW include (1) Starter Toner Cartridge; (1) DR420 Drum Unit; CD-ROM – Includes User’s Manual and Printer Drivers; AC Power Cord; and Quick Setup Guide.
Product Details
- Product Dimensions: 14.2 x 14.5 x 7.2 inches ; 8.3 pounds
- Shipping Weight: 18.3 pounds (View shipping rates and policies)
- Shipping: This item can only be shipped to the 48 contiguous states. We regret it cannot be shipped to APO/FPO, Hawaii, Alaska, or Puerto Rico.
- ASIN: B00450DVDY
- Item model number: HL2270DW
Technical Details
- Prints up to 27ppm
- Built-in wireless and Ethernet network interfaces
- Automatic duplex printing for two-sided documents
- Adjustable, 250-sheet capacity paper tray
- 32MB memory standard
Customer Reviews
1,168 of 1,178 people found the following review helpful:
5.0 out of 5 stars Extreme Review Of Extraordinary Printer, November 10, 2010
By
techdad review (San Francisco Bay Area) - See all my reviews
(TOP 50 REVIEWER)
(TOP 50 REVIEWER)
This review is from: Brother HL-2270DW Compact Laser Printer with Wireless Networking and Duplex (Office Product)
The Brother HL-2270DW is the follow-up to the immensely popular HL-2170W. The 2170W was popular for it's amazing value and print quality. It was also wildly popular because of a neat toner trick to get it to print more pages out of the toner, even when the printer claimed the toner needed replacing. The one big knock of the 2170W was the difficult wireless setup and for being only able to use one network connection at a time-- either Ethernet or WiFi. The 2270DW adds an automatic duplexer and also improves performance.
PROS:
- Fast, fast, fast
- Great print quality
- 3 connectivity options including WiFi
- Automatic duplexer
- Supports Windows XP/2000/Vista/7, Mac OS X, and various Linux distros
- Good looking
- Great value
CONS:
- Starter toner rated at only 700 pages
- Slight curl for duplex printouts
- Uses different and more expensive toner than 2170W
- WiFi limited to 802.11b/g
Once upon a time, I used to have an NEC laser printer, a generic scanner, and an Epson photo printer all on my desk. Well that got old and I consolidated to a multifunction printer and the last 3 printers I owned have all been color inkjet MFP's. The advantages were many but the one drawback was major. The cost per page for inkjet prints became huge, even when printing in black & white. Many color inkjet printers still use color inks when printing in black & white, thus requiring you to replace not only the black ink cartridges, but some of the color ones as well. For me, magenta and yellow frequently ran out, even though we ONLY ever printed in black & white. I'd finally had enough and sought out a solution. As recently as 3 weeks ago, I was able to purchase the 2170W for my parents for a great price and was going to get one myself but they all went out of stock or had gone up in price. Then I found out that they were being discontinued and the 2270DW was the newer model. I pulled the trigger and have not looked back.
2270DW vs. 2170W
The difference between the older 2170W and the newer 2270DW isn't limited to just the change in exterior color. Considering that the base MSRP remains the same, the 2270DW is an outstanding bargain. The 2270DW is slightly faster at 27ppm vs. 22ppm for the 2170W. The 2270DW also uses a 200MHz processor vs. the old 181MHz CPU. The dimensions are identical except that the 2270DW is half an inch taller and happens to weigh almost a half a pound more. I'm guessing the automatic duplexer is responsible for the slightly larger size. Brother also decided to get cheap and included a starter toner rated for only 700 pages, whereas the 2170W was 1000 pages or 2 full reams of paper. The 2270DW also adds GDI printing
INSTALL
The toner and drum are pre-installed but you have to remove it and prep (shake) it before use. I found the Quick Start Guide to be pretty clear and useful for all three connection methods. WiFi configuration is still a bit hokey, but it was easy enough in my opinion.
(USB)
The USB install was a cinch. Install the drivers off of the disc or download them from Brother's website, then plug the USB cable (not included) into your computer and you're good to go.
(Ethernet)
Though the printer's wireless abilities are nice to have, I prefer to use the Ethernet connection to plug the printer directly into my wireless router. This still allows me to print wirelessly from my laptop and via a hardware switch from my desktop. I also don't have to fiddle with the wireless settings and have a stronger, more reliable connection through my router. Using the install wizard, I selected Peer-to-Peer Network Printer as my preferred network print type and was off and running. I performed the same setup on my laptop over WiFi and installed perfectly. One note, I could not quickly find the MAC address to the Ethernet port so I disabled MAC filtering on my router temporarily. If you don't use MAC filtering, then you have nothing to worry about. Afterwards, I found out that you can print the settings from within the Brother print driver and find the MAC address.
(WiFi)
I think a lot of people think they need a WiFi printer to print wireless but most people have wireless routers already that they can just connect the printer to with an Ethernet cable. A printer with WiFi is really only useful if it won't be attached to your router and want it completely independent. As with the 2170W, the 2270DW requires it to be temporarily connected by USB cable or Ethernet to configure the wireless settings, unless, your wireless router supports WiFi Protected Setup or AOSS. The installation wizard on the CD-ROM is pretty straight-forward and I found the install to be painless. Although, if you are using MAC filtering and not broadcasting your SSID, you'll probably want to reverse those temporarily to configure it then switch it back. This is especially true if you are trying to configure the WiFi AFTER you've already set it up by Ethernet and using BRAdmin to do it. To find the internal wireless card's MAC address, hold down the Go button for 10 seconds until it prints a network config page that will enable/disable WiFi and also show you the MAC address. I don't really need WiFi so I only performed the install for the sake of reviewing the procedure.
PERFORMANCE
Time to print has been improved on the 2270DW by nearly 2 seconds, so less time warming up from sleep or off. The actual print speed improvement is less noticeable but 27ppm is insanely fast. I thought my Consumer Reports #1 rated, HP All-in-One Printer was pretty fast, but the 2270DW is at least twice as fast. Text output, even really tiny fonts, looked great. Graphics were also very good. The 2270DW still supports the most current PCL printer language, developed by HP. Oddly though, Brother decided to add GDI capabilities, which is also known as host-based printing and is typically used on low-end printers that put all the printer processing burden on the PC, rather than on the printer's hardware. For example, Brother's bare-bones, cheap 2140 laser printer is GDI only. The 2270DW already has PCL 6 support so I don't see any benefit to having GDI. Even if using a high-end PC might possibly achieve faster to-print speeds, I would think the extra load put on the PC would be a hindrance over just letting the printer's hardware take care of it. I would personally never buy a GDI-only printer. Lastly, given how recently this printer was released, I'm disappointed they didn't include the better 802.11n Wifi support.
NOISE
The 2270DW is noisier than the 2170W, so if you didn't like the 2170W for it's noise, then you definitely won't like the noise from the 2270DW. The fan does stay on for several minutes after it prints but shuts off eventually and then becomes totally silent. The sounds of a laser printer are a welcome change from the wonky noises that my inkjet printers made.
DUPLEXER
If you decide to use the automatic duplexer, it will add more time to your printouts, but what a convenience to not have to manually flip over sheets of paper. Brother rates the duplexer speed to 10 sides per minute. I've always liked the idea of using both sides of a sheet of paper. Save them trees! The duplexer on the 2270DW works well and I have not had any jams, knock on the wood of one of those trees I just saved. Aside from having network printing, the duplexer is my favorite feature of the 2270DW. The only downside to using the duplexer is that it has a noticeable curl. A commenter suggested that heavier paper (24 lb) as opposed to the more commonly used 20 lb paper might help reduce the curl and paper jams.
SOFTWARE
The drivers for the 2270DW include a lot of customization options for your printer, including using the Toner Saver Mode, which is similar to Draft Mode in inkjet printers. Unless you are printing a resume, the Toner Saver Mode is more than good enough for daily print jobs. Additionally, Brother laser printers have the ability to upgrade firmware. Given that the 2270DW is brand new, this is an important ability to note because bug fixes and performance improvements are sure to become available down the road. The most current version of the firmware as of this writing is v1.02. You can also install various administrator utilities for configuration and monitoring (BRAdmin). I used BRAdmin to change the Sleep time from 3 minutes to 2. Another neat feature is that you can use web based management by putting the IP address of your printer into a web browser. This is a great way to review settings and other useful information like how many pages you've printed, remaining drum life, serial number, and firmware version.
COST PER PAGE
The high-yield (2600 pages) genuine Brother toner (TN450) from Amazon is currently $46, which equates to about 1.8 cents per page. That is ridiculous! It is so much cheaper than most inkjets, which can cost between 4 cents and 8 cents per page of text. The only bummer is that the Brother drum unit (DR420) currently costs $84. At that price, if my 2270DW's drum needed replacing, I would probably just end up buying a new printer. The drum is rated at 12,000 pages, which is 24 reams of paper. A lot of factors go into when the drum unit should be replaced but given that I personally don't print more than a ream of paper per year, it would last me 24 years, or basically the life of the printer. Factoring in the cost of a new drum unit, I calculated the... Read more ›
PROS:
- Fast, fast, fast
- Great print quality
- 3 connectivity options including WiFi
- Automatic duplexer
- Supports Windows XP/2000/Vista/7, Mac OS X, and various Linux distros
- Good looking
- Great value
CONS:
- Starter toner rated at only 700 pages
- Slight curl for duplex printouts
- Uses different and more expensive toner than 2170W
- WiFi limited to 802.11b/g
Once upon a time, I used to have an NEC laser printer, a generic scanner, and an Epson photo printer all on my desk. Well that got old and I consolidated to a multifunction printer and the last 3 printers I owned have all been color inkjet MFP's. The advantages were many but the one drawback was major. The cost per page for inkjet prints became huge, even when printing in black & white. Many color inkjet printers still use color inks when printing in black & white, thus requiring you to replace not only the black ink cartridges, but some of the color ones as well. For me, magenta and yellow frequently ran out, even though we ONLY ever printed in black & white. I'd finally had enough and sought out a solution. As recently as 3 weeks ago, I was able to purchase the 2170W for my parents for a great price and was going to get one myself but they all went out of stock or had gone up in price. Then I found out that they were being discontinued and the 2270DW was the newer model. I pulled the trigger and have not looked back.
2270DW vs. 2170W
The difference between the older 2170W and the newer 2270DW isn't limited to just the change in exterior color. Considering that the base MSRP remains the same, the 2270DW is an outstanding bargain. The 2270DW is slightly faster at 27ppm vs. 22ppm for the 2170W. The 2270DW also uses a 200MHz processor vs. the old 181MHz CPU. The dimensions are identical except that the 2270DW is half an inch taller and happens to weigh almost a half a pound more. I'm guessing the automatic duplexer is responsible for the slightly larger size. Brother also decided to get cheap and included a starter toner rated for only 700 pages, whereas the 2170W was 1000 pages or 2 full reams of paper. The 2270DW also adds GDI printing
INSTALL
The toner and drum are pre-installed but you have to remove it and prep (shake) it before use. I found the Quick Start Guide to be pretty clear and useful for all three connection methods. WiFi configuration is still a bit hokey, but it was easy enough in my opinion.
(USB)
The USB install was a cinch. Install the drivers off of the disc or download them from Brother's website, then plug the USB cable (not included) into your computer and you're good to go.
(Ethernet)
Though the printer's wireless abilities are nice to have, I prefer to use the Ethernet connection to plug the printer directly into my wireless router. This still allows me to print wirelessly from my laptop and via a hardware switch from my desktop. I also don't have to fiddle with the wireless settings and have a stronger, more reliable connection through my router. Using the install wizard, I selected Peer-to-Peer Network Printer as my preferred network print type and was off and running. I performed the same setup on my laptop over WiFi and installed perfectly. One note, I could not quickly find the MAC address to the Ethernet port so I disabled MAC filtering on my router temporarily. If you don't use MAC filtering, then you have nothing to worry about. Afterwards, I found out that you can print the settings from within the Brother print driver and find the MAC address.
(WiFi)
I think a lot of people think they need a WiFi printer to print wireless but most people have wireless routers already that they can just connect the printer to with an Ethernet cable. A printer with WiFi is really only useful if it won't be attached to your router and want it completely independent. As with the 2170W, the 2270DW requires it to be temporarily connected by USB cable or Ethernet to configure the wireless settings, unless, your wireless router supports WiFi Protected Setup or AOSS. The installation wizard on the CD-ROM is pretty straight-forward and I found the install to be painless. Although, if you are using MAC filtering and not broadcasting your SSID, you'll probably want to reverse those temporarily to configure it then switch it back. This is especially true if you are trying to configure the WiFi AFTER you've already set it up by Ethernet and using BRAdmin to do it. To find the internal wireless card's MAC address, hold down the Go button for 10 seconds until it prints a network config page that will enable/disable WiFi and also show you the MAC address. I don't really need WiFi so I only performed the install for the sake of reviewing the procedure.
PERFORMANCE
Time to print has been improved on the 2270DW by nearly 2 seconds, so less time warming up from sleep or off. The actual print speed improvement is less noticeable but 27ppm is insanely fast. I thought my Consumer Reports #1 rated, HP All-in-One Printer was pretty fast, but the 2270DW is at least twice as fast. Text output, even really tiny fonts, looked great. Graphics were also very good. The 2270DW still supports the most current PCL printer language, developed by HP. Oddly though, Brother decided to add GDI capabilities, which is also known as host-based printing and is typically used on low-end printers that put all the printer processing burden on the PC, rather than on the printer's hardware. For example, Brother's bare-bones, cheap 2140 laser printer is GDI only. The 2270DW already has PCL 6 support so I don't see any benefit to having GDI. Even if using a high-end PC might possibly achieve faster to-print speeds, I would think the extra load put on the PC would be a hindrance over just letting the printer's hardware take care of it. I would personally never buy a GDI-only printer. Lastly, given how recently this printer was released, I'm disappointed they didn't include the better 802.11n Wifi support.
NOISE
The 2270DW is noisier than the 2170W, so if you didn't like the 2170W for it's noise, then you definitely won't like the noise from the 2270DW. The fan does stay on for several minutes after it prints but shuts off eventually and then becomes totally silent. The sounds of a laser printer are a welcome change from the wonky noises that my inkjet printers made.
DUPLEXER
If you decide to use the automatic duplexer, it will add more time to your printouts, but what a convenience to not have to manually flip over sheets of paper. Brother rates the duplexer speed to 10 sides per minute. I've always liked the idea of using both sides of a sheet of paper. Save them trees! The duplexer on the 2270DW works well and I have not had any jams, knock on the wood of one of those trees I just saved. Aside from having network printing, the duplexer is my favorite feature of the 2270DW. The only downside to using the duplexer is that it has a noticeable curl. A commenter suggested that heavier paper (24 lb) as opposed to the more commonly used 20 lb paper might help reduce the curl and paper jams.
SOFTWARE
The drivers for the 2270DW include a lot of customization options for your printer, including using the Toner Saver Mode, which is similar to Draft Mode in inkjet printers. Unless you are printing a resume, the Toner Saver Mode is more than good enough for daily print jobs. Additionally, Brother laser printers have the ability to upgrade firmware. Given that the 2270DW is brand new, this is an important ability to note because bug fixes and performance improvements are sure to become available down the road. The most current version of the firmware as of this writing is v1.02. You can also install various administrator utilities for configuration and monitoring (BRAdmin). I used BRAdmin to change the Sleep time from 3 minutes to 2. Another neat feature is that you can use web based management by putting the IP address of your printer into a web browser. This is a great way to review settings and other useful information like how many pages you've printed, remaining drum life, serial number, and firmware version.
COST PER PAGE
The high-yield (2600 pages) genuine Brother toner (TN450) from Amazon is currently $46, which equates to about 1.8 cents per page. That is ridiculous! It is so much cheaper than most inkjets, which can cost between 4 cents and 8 cents per page of text. The only bummer is that the Brother drum unit (DR420) currently costs $84. At that price, if my 2270DW's drum needed replacing, I would probably just end up buying a new printer. The drum is rated at 12,000 pages, which is 24 reams of paper. A lot of factors go into when the drum unit should be replaced but given that I personally don't print more than a ream of paper per year, it would last me 24 years, or basically the life of the printer. Factoring in the cost of a new drum unit, I calculated the... Read more ›
110 of 114 people found the following review helpful:
5.0 out of 5 stars insane value & easy setup, November 15, 2010
This review is from: Brother HL-2270DW Compact Laser Printer with Wireless Networking and Duplex (Office Product)
This is a nice, compact laser printer with good build quality.
Wireless was essential for me - I've been waiting quite a while for a wireless laser that had reliably great reviews. I unpacked the box, removed the plastic strips, scanned the quick start guide, plugged the printer in, and everything was great so far. I then downloaded the newest drivers from the Brother website (drivers on included CD's are usually 3-12 month old) for my Windows 7 x64 and Windows 7 x32 laptops; executing the driver programs walks you through setup. In the past for wireless products, I've found you usually have to first set them up on a wired (Ethernet or USB) connection, then change things over to wireless. I decided to test the technological development level and go straight to wireless setup, starting with the 64-bit machine. This consisted of inserting the tip of a pen [you could also use a paperclip, etc] into the wireless setup button hole, telling the printer to start looking for a router; then I ran downstairs, pushed/held the WPS button on my wireless router, telling it to start looking for another device - in one minute they met, and fell in love. That was it. The driver installation software (on the wireless 64-bit laptop) detected they had a successful partnership and moved on to the final screens. Windows 7 had installed the printer with all of the advanced menus and controls. I then installed the driver on the 32-bit laptop and it auto-detected the successful partnership without touching any hardware - very simple install and wireless printing was ready to go.
I never bit with the wireless inkjet offerings, as the long term operating costs of inkjets are crazy. I've been refilling the toner cartridges on laser printers for years, running them for so cheap it's amazing. If this unit just had laser printing and reliable wireless it would be a fantastic deal. However, it has many features which are totally surprising. This review is already too long so I'll just say that the auto duplexing is great. What is even cooler is the Booklet feature. I'm holding in my hand a 20-page PDF that I selected "Booklet" in the options while printing. It printed on both sides of the paper, reduced the pages to half-sheets, arranged the pages in the precise/complicated order, and output tiny stack of FIVE sheets (from 20). I folded the stack in half and viola - a perfect booklet that is more convenient to travel with and uses one-quarter of the paper! I'm not sure you can know how cool this is until you actually have a booklet in your hand - so buy this machine now and see for yourself.
One final caution, the supplier I normally order bulk toner from does not yet have the formulation for this printer. I'm sure they will in time, but for now you might actually have to buy the TN450 replacement cartridge which runs at roughly 2.2 cents per page, once the 700-page starter cartridge is exhausted.
I've only had this printer for a few days, so hopefully it lives up to my current expectations and retains its 5-star rating. To be honest, these things are going for less than a hundred (on sale + coupon, at office supply stores) and at that price point just straight laser printing with wireless is a great deal.
Wireless was essential for me - I've been waiting quite a while for a wireless laser that had reliably great reviews. I unpacked the box, removed the plastic strips, scanned the quick start guide, plugged the printer in, and everything was great so far. I then downloaded the newest drivers from the Brother website (drivers on included CD's are usually 3-12 month old) for my Windows 7 x64 and Windows 7 x32 laptops; executing the driver programs walks you through setup. In the past for wireless products, I've found you usually have to first set them up on a wired (Ethernet or USB) connection, then change things over to wireless. I decided to test the technological development level and go straight to wireless setup, starting with the 64-bit machine. This consisted of inserting the tip of a pen [you could also use a paperclip, etc] into the wireless setup button hole, telling the printer to start looking for a router; then I ran downstairs, pushed/held the WPS button on my wireless router, telling it to start looking for another device - in one minute they met, and fell in love. That was it. The driver installation software (on the wireless 64-bit laptop) detected they had a successful partnership and moved on to the final screens. Windows 7 had installed the printer with all of the advanced menus and controls. I then installed the driver on the 32-bit laptop and it auto-detected the successful partnership without touching any hardware - very simple install and wireless printing was ready to go.
I never bit with the wireless inkjet offerings, as the long term operating costs of inkjets are crazy. I've been refilling the toner cartridges on laser printers for years, running them for so cheap it's amazing. If this unit just had laser printing and reliable wireless it would be a fantastic deal. However, it has many features which are totally surprising. This review is already too long so I'll just say that the auto duplexing is great. What is even cooler is the Booklet feature. I'm holding in my hand a 20-page PDF that I selected "Booklet" in the options while printing. It printed on both sides of the paper, reduced the pages to half-sheets, arranged the pages in the precise/complicated order, and output tiny stack of FIVE sheets (from 20). I folded the stack in half and viola - a perfect booklet that is more convenient to travel with and uses one-quarter of the paper! I'm not sure you can know how cool this is until you actually have a booklet in your hand - so buy this machine now and see for yourself.
One final caution, the supplier I normally order bulk toner from does not yet have the formulation for this printer. I'm sure they will in time, but for now you might actually have to buy the TN450 replacement cartridge which runs at roughly 2.2 cents per page, once the 700-page starter cartridge is exhausted.
I've only had this printer for a few days, so hopefully it lives up to my current expectations and retains its 5-star rating. To be honest, these things are going for less than a hundred (on sale + coupon, at office supply stores) and at that price point just straight laser printing with wireless is a great deal.
57 of 59 people found the following review helpful:
5.0 out of 5 stars Have no fear. Easiest wireless setup, ever., November 2, 2010
By
bilagaana (USA) - See all my reviews
(VINE VOICE)
(VINE VOICE)
This review is from: Brother HL-2270DW Compact Laser Printer with Wireless Networking and Duplex (Office Product)
I dumped my one year old HP 8000 wireless inkjet when it became obvious it was going to cost me two hundred dollars a year for even minimum use. You can read my review on that pig's product page for more details.
As with most users I have no expertise in wireless. Every time I add a device, it's plug-and-pray time. My network is run through an old Asus router which supports only WEP and WPA, not WPS. I don't know exactly what that means, other than that WPS apparently is a new standard which improves the installation process. My home network has slowly grown to inlude a W7 desktop, a Vista laptop, two other XP desktops (I never throw away old computers), one wireless adapter for my TV and bluray player, and one wireless printer.
I have to say that this Brother printer was the easiest installation experience I have ever had with any piece of wireless hardware. For once, a manufacturer went to obvious effort to make certain the manual was clear and coherent. Every step on every page is exactly representative of what was shown on the screen [Update: Mac users, see Rich Hayhurst's comment (below)]. Every paragraph is bulleted so that if you are directed to skip a step based on your particular configuration there is no confusion as to where to proceed.
The net result is that, though I could not use what is billed as the one-button WPS setup and had to input the SSID and network key manually (I'm glad I wrote those down a couple years ago when I first set up the router), the Brother printer was recognized and up and running on all three active computers in less than twenty minutes, total. All for little more effort than inserting the installation disk in each drive.
The print quality is excellent, the automatic duplex functions flawlessly, the machine is fast, quiet and has a very small footprint. I am hoping its economy and durability live up to the rest of my initial experience with this great little printer.
p.s.: Anybody want to buy a wireless inkjet, cheap?
Update 12/2/10 -- I do notice the paper curling (due to heat, I'm sure) some other reviewers have described. It's possible a heavier weight paper would lessen this but I haven't had a chance to experiment, yet. This curling might be an issue for business users who are concerned about quality of presentation in printed correspondence. It's perfectly acceptable for my general personal uses.
One minor tip: If you get this printer, keep in mind the paper feed in this unit is towards the front of the tray. I'm accustomed to the top of the sheet feeding towards the rear of the tray. I was printing adhesive labels and having alignment problems until I realized this difference.
As with most users I have no expertise in wireless. Every time I add a device, it's plug-and-pray time. My network is run through an old Asus router which supports only WEP and WPA, not WPS. I don't know exactly what that means, other than that WPS apparently is a new standard which improves the installation process. My home network has slowly grown to inlude a W7 desktop, a Vista laptop, two other XP desktops (I never throw away old computers), one wireless adapter for my TV and bluray player, and one wireless printer.
I have to say that this Brother printer was the easiest installation experience I have ever had with any piece of wireless hardware. For once, a manufacturer went to obvious effort to make certain the manual was clear and coherent. Every step on every page is exactly representative of what was shown on the screen [Update: Mac users, see Rich Hayhurst's comment (below)]. Every paragraph is bulleted so that if you are directed to skip a step based on your particular configuration there is no confusion as to where to proceed.
The net result is that, though I could not use what is billed as the one-button WPS setup and had to input the SSID and network key manually (I'm glad I wrote those down a couple years ago when I first set up the router), the Brother printer was recognized and up and running on all three active computers in less than twenty minutes, total. All for little more effort than inserting the installation disk in each drive.
The print quality is excellent, the automatic duplex functions flawlessly, the machine is fast, quiet and has a very small footprint. I am hoping its economy and durability live up to the rest of my initial experience with this great little printer.
p.s.: Anybody want to buy a wireless inkjet, cheap?
Update 12/2/10 -- I do notice the paper curling (due to heat, I'm sure) some other reviewers have described. It's possible a heavier weight paper would lessen this but I haven't had a chance to experiment, yet. This curling might be an issue for business users who are concerned about quality of presentation in printed correspondence. It's perfectly acceptable for my general personal uses.
One minor tip: If you get this printer, keep in mind the paper feed in this unit is towards the front of the tray. I'm accustomed to the top of the sheet feeding towards the rear of the tray. I was printing adhesive labels and having alignment problems until I realized this difference.
Posted in: Office Electronic
Posts
0 comments:
Post a Comment